Attn: Togglers
You pick from these 12V togglers: The 35A measures 1-3/8" x 3/4" x 1-1/2" with (2) screw terminals and a 1-1/8" long chromed bat. The 50A measures 1-3/8" x 3/4" x 1-1/2" with a 1-1/8" long chromed bat....
View ArticleOur Switch's Lips Are Sealed
This rubber-sealed momentary push-button switch is normally-open and has a 1-1/4" long x 5/8" dia threaded brass shaft with a washer and nut leading to 1" x 3/4" x 5/8" housing with (2) stand-off screw...
View ArticleMulti-Booted Toggle
This SPST toggle switch is rated for up to 35A at 12V and comes with red, blue, black and yellow boots for the neck. Measures 1-3/8" x 3/4" x 3/4" with a snazzy perforated 1-1/4" long brushed aluminum...
View ArticleLittle Gray Rocker
No, not Keith Richards, but a nice gray latching SPDT rocker switch, rated for 15A at 125VAC, 7A at 250 VAC and 1/2A at 125VDC. 3/4 HP over all and measures just over 1" x 7/16" x 1" counting the...
View ArticlePush Our Button
A push-button switch that stays pushed. This latching SPST pushbutton switch is rated for 6A at 125VAC or 3A at 250VAC. Has a 3/8" dia shank, mounting nuts, and 6" leads. From Gardner-Bender®. UL.
View ArticlePush The Button
These pushbutton switches have (8) sets of SPDT contacts and measure 2-3/8" long (not counting the button) x 1" x 5/8". The contacts for both rows, starting at the pushbutton, are normally closed;...
View ArticleGet Ready To Rock
Our DPST rocker switch is rated for up to 10A at 125VAC or 4A at 250VAC. Comes with (4) 1/4" quick-disconnect terminals. The black plastic housing measures 1-1/8" x 7/8" x 1-1/4" with panel-mount tabs...
View ArticleLatching Pushbuttons
Made for desktop PCs, these DPST latching pushbutton switches from Legion Electronics are rated for up to 10A at 125-250VAC. Measure 1-1/4" x 3/4" x 11/16" with a spring-loaded 5/8" plunger, (4)...
View ArticleMomentary Rocker
These SPDT momentary rocker switches from Otto® have (3) 1/4” quick-disconnect terminals and panel-mounting tabs. Measure 1-1/8” deep x 1” x 3/8” and are rated for 10.1A at 125VAC. UL/CSA.
View ArticlePush On
And see the red light. This panel-mount SPST push-on/push-off switch from Molex is rated for 125V and has a neon indicator lamp. Measures 2-1/4" x 15/16" x 1/2" with 3/16" quick-disconnect terminals....
View ArticleLittle Rocker
This momentary rocker switch is just 3/4" x 9/16" x 9/16" deep with 1/8" quick-disconnect terminals at the bottom. It's rated for up to 15A at 125VAC, 7.5A at 250VAC and is normally open. UL.
View ArticleBig Switches
These large momentary SPDT push-button switches are rated 10A at 125/250VAC and are mounted to a 2-7/16"dia lens plate with a 1-1/8" long x 15/16 - 2 shaft that comes with a plastic washer and nut....
View ArticleWanna Toggle?
The correct answer is "I don't know; I've never toggled." If, however, you just want to turn something on and off, here's a choice of toggles for your switching delectation. The DPDT toggle is rated...
View ArticlePush My Giant Switch
Our momentary SPDT switches are mounted to a 2" square neon pushbutton with a 1-3/16" long x 15/16" - 13 plastic shaft with a washer and nut. Switch is rated at 10A at 125/250V; indicator lamp at 12V,...
View ArticlePush The White Button
This white panel-mount latching (push on, push off) SPST switch is rated for 1A at 250V, and has a pair of set-screw terminals. Measures 1" x 1/2" x 1/4" dia with a 1/4" long x 3/8" threaded shaft....
View ArticleLatch On To This
This SPST latching (push on, push off) pushbutton switch reminds CJ of a cathedral radio cabinet, which means he's no spring chicken, or else he's just nostalgic. But they are indeed pretty retro...
View ArticleRockers
Panel-mount SPST rocker switches are rated for up to 10A at 125V and 6A at 250V. Measure 7/8" x 15/16" with snap clips for mounting, a 1-3/16" spacer and quick-disconnect terminals. You pick the double...
View ArticlePush My Giant Switch
Our latching SPDT switch is mounted to a 2" square yellow neon pushbutton with a 1-3/16" long x 15/16" - 13 plastic shaft with a washer and nut. Switch is rated at 10A at 125/250V; indicator lamp at...
View ArticleAttn: Togglers
You pick from these 12V togglers: The 35A measures 1-3/8" x 3/4" x 1-1/2" with (2) screw terminals and a 1-1/8" long chromed bat. The 50A measures 1-3/8" x 3/4" x 1-1/2" with a 1-1/8" long chromed bat....
View ArticleDon't Lose The Key
Designed to be a battery isolation switch for a high-amperage battery, this SPST key switch will take up to 100A at 12 or 24V. Measures 2-3/16" dia with a key shaft on top and (2) 3/8" lugs with double...
View Article
More Pages to Explore .....